How to Read the Casting Numbers on a Ford 5.8

Download Article

Download Article

The Ford Motor Company has put identification number tags on some of its motors since the mid-1950s and on all of its motors since January 1964. These tags tell yous the month and year of production, the model year, the change level number, and the CID (cubic inch displacement). In the event that you cannot discover the tags, you lot can also use a casting number to obtain certain information.

1. 1

   Use the number of valve embrace bolts to narrow downward the blazon of engine you have in front of you. Valve embrace bolts are the big bolts on the elevation of the engine, holding downwards the plate (ordinarily marked "Ford") on acme of the valves. The number of bolts corresponds to your engine type, which will help you locate the more than useful ID tag.

   • 2 bolts: 239/256/272/292/312
   • five bolts: 332/352/360/361/390/391/406/410/427/428
   • half-dozen bolts: 221/260/289/302/351W
   • seven bolts: 429/460
   • 8 bolts: 351C/351M/400

2. 2

   Locate the ID tag under coil attaching bolts for six-cylinder and some viii-cylinder engines. The tag is a series of numbers and letters etched in and used to decipher the year, make, and model of you engine. It is found underneath the bolts on the left or correct side of the engine, nearly the forepart of the car. You tin can find the tag here on all half-dozen-cylinder engines made after 1964, and on some V8 engines.^[1]

   • The tag is roughly iii inches long, half an inch wide, and made of aluminum.
   • If you are unsure what kind of engine y'all have, recollect back to the valve cover bolts as you work through the following steps. This volition assistance you narrow downwardly your options.

   Advert

3. 3

   Cheque nether the dipstick attaching bolts on eight-cylinder, 352 Model engine. Check under the dipstick, which is the pocket-size, plastic-handled piece that lets you check your oil.

4. 4

   Expect nether the oestrus indicator bulb, carburetor attaching stud, and ignition coil bolt if yous nonetheless can't find the tag. These are the terminal few places the tag might be. If it is not there, it may have been removed, fallen off, or but be visible when the engine is not in the auto. Depending on where you find the tag, you can learn something well-nigh the engine:^[2]

   • Indicator Bulb: 360, 330, 391 engines.
   • Dipstick Tube: 352 engines.
   • Carburetor Stud: 401, 477 534 engines.^[3]

5. 5

   Learn to read the ID tag appropriately. In one case y'all've found the identification tag, you need to know how to read it to get the correct information. Luckily, the tags are unproblematic to breakdown. From upper left to bottom right:^[4]

   • Cubic Inch Displacement (CID): The offset three numbers, constitute in the upper left corner, tell yous the size of the engine.
   • Manufactory: The single letter to the right of the CID is where the engine was built. "C" is for Cleveland, "Eastward" is for Ensite, Canada, and "W" is for Windsor, Canada.
   • Year: The side by side 2 numbers are for the year the engine was built. 70, for example, would mean information technology was fabricated in 1970.
   • Calendar month Built: This hyphenated number and letter of the alphabet correspond to the calendar month. The months are in alphabetical order, and so A = January and M = December. There is no "i" then people don't confuse information technology the number 1. 0-A would mean January 1970, v-C March 1975, etc. (assuming the yr code is for the 70'due south).
   • Engine Code Number: This final 3-digit number is the ID of your particular engine. You tin look up this code online to see the specs of your current engine.^[5]

   Advertisement

1. 1

   Looks for nine-digit casting tags to learn more nigh your engine's make and model. The casting tag is etched into your motor when it is created, and is used to help discover the right parts if you need a replacement. This code also packs a big amount of data in information technology that will help you get to know your engine meliorate.

   • You lot may demand to clean the engine with a rag and some degreaser if it is too dirty to see the letters.
   • This code is usually on the side of the engine, but you might not be able to run across information technology when the engine is in a auto with older models. Use a lite to scan both sides of the engine to find it.^[6]
   • Ex.C5AE-9425-B^[7]

2. two

   Read the offset ii digits in the identification tag to find the twelvemonth the engine was made. This will be a alphabetic character. If the letter is a "B," information technology means that the engine was congenital in the 1950s. Each decade later on that has its own succeeding letter; "C" designates the 1960s, "D" designates the 1970s, and then on. The digit after the letter is the bodily twelvemonth. So C9 would be 1969, E4 would be 1984, etc.^[viii]

3. 3

   Read the third digit in the casting number to determine the engine blueprint. This will be a alphabetic character, and it signifies the basic design of the vehicle equally shown beneath. Of form, this code should match up with the car that it is in (i.east. a Mercury could be coded E5M), but you may exist dealing with standalone engines or redesigned cars.^[9]

   • "A" - Generic and full-size engine
   • "D" - Falcon
   • "East" - Truck
   • "F" - Foreign Trans-Am racing
   • "G" - 1961 to 1967 Comet/1968 to 1976 Montenegro
   • "H" - 1966 to 1982 Heavy truck
   • "J" - Industrial Ford
   • "Fifty" - Lincoln
   • "M" - Mercury
   • "O" - 1967 to 1976 Ford Torino/all Ford Fairlane
   • "Southward" - Thunderbird
   • "T" - Truck
   • "W" - Cougar
   • "Y" - Meteor
   • "Z" - Mustang
   • "6" - Pantera

4. 4

   Brand certain that the fourth digit is always an "Eastward. " This digit stands for the type of function. Due east stands for "Engine," and so this should always be the fourth digit you see when identifying Ford motors.

5. 5

   Read the adjacent 4 digits, which are the last digits in the motor number. These four numbers will always exist betwixt 6000 and 6898, which describes the role numbering of the generic engine assembly. Different parts of the motor will correspond to dissimilar four-digit numbers.^[x]

6. 6

   Check the last digit, unremarkably a letter, to make up one's mind the version of your part. If your engine is modeled after the original design, this letter will be A. If it is the third manufactured version of the engine, it will exist a C, then on. This digit tin be upwards to three digits long. For example, AB would be the 28th version — 26 for A-Z, then two for A-B.^[11]

   Advertising

Add New Question

• Question

  What does the number atop the motor mean?

  

  That is a part number, not the motor number which is stamped on the block. You may get a clue by googling the part number. The messages indicate a part from the cooling system. The like shooting fish in a barrel mode to identify the motor, if it's the original, is by the VIN (vehicle identification number). Using that, you can get all the data (including manuals) from Ford.

• Question

  Does Ford make a V8 with a rear distributor?

  

  Yes, they do, but they are pretty hard to find.

• Question

  I accept a Ford 460 engine. The only number I can discover on it is D3TE-AE. What year is this?

  

  It's a 1973 engine. D = '70s; 3 = twelvemonth; Due east = engine. Information technology's probably a Galaxy.

• Question

  My e-block casting number is D2AE-6015-BA13. Could you tell me what the engine is?

  

  According to Google, information technology'southward a 1972 351W minor block.

• Question

  How do I detect out what engine my Ford has?

  

  You lot could enquire the dealer, check your owner'southward manual or cheque online.

• Question

  What tin I exercise to figure out what yr the heads on my 460 are from?

  

  C7VE would exist a 1967 engine, C8 a 1968, D0VE would be 1970, and D3VE is a mutual head used from 1973 upwards to 1979. D2VE is an odd duck; non a good function, discontinued later one year for detonation problems of trying to reduce compression and emissions. Light trucks use the same caput; 460 was non used on a truck until 1972 and was rare. 429 uses same heads and block, but creepo and piston are different.

• Question

  How can I tell what year the motor is if I know the model number and the type of truck it was in?

  

  The VIN number can be given to a Ford dealer. They have manufacturing dates, specs, everything for the car. The VIN is constitute by looking on the left side nuance through the windshield.

• Question

  How can I effigy out where my motor was made if I have the engine type and number?

  

  Go to an auto shop, it tin can be faster and easier than trying to effigy that out by yourself.

• Question

  I take a Ford block engine that has the number JG 224271 over the bong housing, simply on the passenger side of the block upwardly front it has the number 5F1C. Can anyone help me identify the motor?

  

  The numbers yous list are appointment codes. 5 is for the year, e.k. 85. F is for June the 6 h calendar month of the year and one is the 24-hour interval, e.grand. June 1 1975-85. Or, whatever decade the vehicle was built.

• Question

  How can I figure out what blazon of motor is in the vehicle?

  

  Count the spark plugs and accept not of where they are, if they are in a "Five" pattern from looking direct at the engine. For example if you have 4 on each side and the engine has 2 heads in a "V" shape, you have a V8. I4s exist, engine is in a straight pattern with 4 spark plugs on the elevation or side in full.

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

• You may need to clean sections of the motor to find the tag, then take a bottle of degreaser, a wire castor and a rag with you on your search.

Ad

Things Yous'll Need

• Degreaser
• Wire castor
• Rags

About This Commodity

Article Summary 10

To place a Ford motor, commencement by checking valve encompass bolts on the top of the engine for Ford markings. If the bolts are unmarked, look for an ID tag for manufacturer information. Tags tin can exist institute nether gyre attaching bolts for 6-cylinder engines and some 8-cylinder engines, or nether the dipstick attaching bolts on other 8-cylinders. If you lot can't find the tag there, look under the estrus indicator seedling, carburetor attaching stud, or the ignition gyre bolt, and bank check the ID tag for information similar engine code number. To learn how to place a Ford motor using casting tags, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 412,412 times.

Did this article help you?

labrecquewhice1982.blogspot.com

Source: https://www.wikihow.com/Identify-a-Ford-Motor

Share this post